Thermoreversible gelation in poly(ethylene oxide)/carbon black hybrid melts

The study focuses on the structure and viscoelasticity of poly(ethylene oxide)/carbon black fluids. The hybrids when subjected to extreme thermal annealing (at temperatures far above the melting point of the matrix) exhibit a 3–4 orders of magnitude increase in viscosity. Surprisingly, the effect is reversible and the viscosity reverts back to its initial value upon subsequent cooling. This rather unique sol–gel transition in terms of strength, steepness and thermal reversibility points to major structural rearrangements via extensive particle clustering, in agreement with microscopy observations. In related systems it was found that when matrix-particle electrostatic interactions are present the gelation is essentially diminished.     

Process modeling for doped regions formation on high efficiency crystalline silicon solar cells

Process modeling approaches derived from CMOS industry are successfully applied in the Photovoltaic industry, in order to provide guidance on the design of the doped regions. The accurate prediction of the dopant diffusion and activation kinetics, as well the oxide growth rate, are essential for the adequate profile engineering. The latter is vital for a cost effective optimization of the cell operation. In addition, in the case of ion implantation, TCAD modeling is also necessary for the monitoring of the damage evolution and its optimized reduction. Indeed, high levels of residual defects are found to deteriorate the electrical properties of the doped regions, as they act as recombination centers for Shockley-Read-Hall recombination and thus limit the minority carrier lifetimes. Designing optimum anneal strategies is an important objective of the TCAD modeling approach. In this paper we are presenting an overview of our developments to optimize TCAD simulations for doped regions formation used in high efficiency crystalline silicon solar cells. The modeling studies cover the two major dopant techniques (tube diffusion and ion implantation) for each dopant (Boron and Phosphorus).     

Autonomous Vehicle Emergency Recovery Tool: A Cooperative Robotic System for Car Extraction

Vehicles have been proven to be an ideal means for terrorists because they can be meticulously prepared well in advance before being deployed in urban and public places. To increase the risk and burden of explosive ordnance disposal teams, third‐party vehicles have also been used to block the access path to the explosive loaded vehicle. In this paper, we present a multirobot system that can remove vehicles from confined spaces with delicate handling, swiftly and in any direction to a safer disposal point. The new lifting robots, capable of omnidirectional movement, autonomously underride the identified vehicle and dock to its wheels for a synchronized lifting and extraction. The validity and efficiency of the novel robotic system is illustrated via experiments in an indoor parking lot, demonstrating successful autonomous navigation, docking, lifting, and extraction of a conventional car for a total covered distance of 20 m.     

Moisture adsorption isotherms of two esterified Greek hardwoods

Two Greek hardwoods (Ulmus montana and Acer pseudoplatanus), were esterified with acetic and maleic anhydride and studied for moisture adsorption behaviour. The sorption isotherms for untreated and chemically modified wood were analysed using the Hailwood-Horrobin model. The experimental analysis of the sorption isotherms showed that esterification affects both total, polymolecular and monomolecular sorption. Acetic anhydride treatment was found more effective in reducing the hygroscopicity of wood compared to maleic anhydride treatment at comparable weight percentage gain, reflecting probably the strong ester bonds between acetic anhydride and wood. Identical e.m.c values were attained in both types of sorption for maple and elm wood, at comparable weight percentage gain, not only for the unmodified samples but for the modified ones as well.

---

Sorptionsisothermen von zwei veresterten griechischen Laubhölzern

Zusammenfassung Zwei griechische Laubhölzer (Ulmus montana und Acer pseudoplatanus) wurden mit Acet- und Maleinanhydrid verestert und ihr Feuchte-Sorptionsverhalten untsersucht. Die Sorptionsisothermen der unbehandelten und chemisch behandelten Proben wurden mittels des Hailwood-Horrobin-Modells analysiert. Es zeigte sich, dass die Veresterung sowohl die polymolekulare als auch die monomolekulare Sorption beeinflusst. Die Behandlung mit Acetanhydrid war bei vergleichbarem Massenzuwachs effektiver als mit Maleinanhydrid bezüglich des Erniedrigens der hygroskopischen Eigenschaft, was wahrscheinlich mit den starken Esterbindungen zwischen Holz und Acetanhydrid zusammenhängt. Die Gleichgewichtsfeuchten waren bei vergleichbaren Gewichtszunahmen für beide Holzarten und beide Soptionstypen identisch, und zwar nicht nur für die unbehandelten, sondern auch für die modifizierten Proben.

     

Hemodialysis catheter infection with unusual presentation and grave outcome

Bacteremia from central venous catheter (CVC) infection causes morbidity and mortality in patients on hemodialysis (HD). Diagnosis of the infection can be difficult and may require special imaging. A 70-year-old man with diabetic nephropathy was on HD for 11 months through a permanent CVC. Because of symptomatic osteoporosis, he had kyphoplasty in three lumbar vertebrae (L2, L3, L4) 6 months after starting HD. Severe back pain persisted after kyphoplasty. Throughout the HD period, the exit site of the CVC had a clean appearance, there was no fever, and blood leukocyte counts were normal. During the 11th month of HD, he complained of subjective fever at home. Blood count revealed normal leukocyte count with neutrophilic predominance and blood cultures grew methicillin-resistant Staphylococcus aureus (MRSA). Echocardiogram revealed no heart valve vegetations, but irregular thickening of the CVC wall. Fluorodeoxyglucose positron-emission tomography-computed tomography (FDG-PET-CT) revealed severe inflammation of the CVC wall and a picture consistent with osteomyelitis and severe destruction of the body of the 11th thoracic vertebra. He was treated with intravenous vancomycin and removal of the CVC, the wall of which was grossly inflamed and grew in culture MRSA. Three weeks later, he discontinued HD because of persistent severe back pain. CVC infection with bacteremia and remote infectious foci having grave sequelae can develop in HD patients with paucity of clinical manifestations. FDG-PET-CT is a useful imaging tool in establishing the presence and extent of both the CVC infection and remote metastatic infectious foci.     

Laser-induced damage and recovery of plasmonically targeted human endothelial cells

Laser-induced techniques that employ the surface plasmon resonances of nanoparticles have recently been introduced as an effective therapeutic tool for destroying tumor cells. Here, we adopt a low-intensity laser-induced technique to manipulate the damage and repair of a vital category of noncancerous cells, human endothelial cells. Endothelial cells construct the interior of blood vessels and play a pivotal role in angiogenesis. The degree of damage and repair of the cells is shown to be influenced by laser illumination in the presence of gold nanoparticles of different morphologies, which either target the cellular membrane or are endocytosed. A pronounced influence of the plasmonic nanoparticle laser treatment on the expression of critical angiogenic genes is shown. Our results show that plasmon-mediated mild laser treatment, combined with specific targeting of cellular membranes, enables new routes for controlling cell permeability and gene regulation in endothelial cells.     

Receptor-mediated interactions between colloidal gold nanoparticles and human umbilical vein endothelial cells

A new strategy to manipulate cell operations is demonstrated, based on membrane-receptor-specific interactions between colloidal peptide-capped gold nanoparticles and human umbilical vein endothelial cells. It is shown that colloidal gold nanoparticles of similar charge and size but capped with different peptide sequences can deliberately trigger specific cell functions related to the important biological process of blood vessel growth known as angiogenesis. Specific binding of the peptide-capped particles to two endothelial-expressed receptors (VEGFR-1, NRP-1), which control angiogenesis, is achieved. The cellular fate of the functional nanoparticles is imaged and the influence of the different peptide-coated nanoparticles on the gene expression profile of hypoxia-related and angiogenic genes is monitored. The findings open up new avenues towards the deliberate biological control of cellular functions using strategically designed nanoparticles.     

A multistep method for steady-state Monte Carlo simulations of polymerization processes

Identifying the microscopic information of polymers is of great significance for polymerization processes. Monte Carlo (MC) simulation is a powerful tool to predict the microscopic structure of polymers. Currently, most MC methods are designed for dynamic polymerization processes based on time evolution. The study on MC simulation for steady-state processes is scarce and current approaches face challenges in addressing complex mechanisms. In this work, a multistep method is proposed for the steady-state MC simulation. By introducing the “buffer pool” concept, the proposed method is computationally efficient and flexible to derive accurate predictions for processes with various polymerization mechanisms. Three applications with increasing complexity in the kinetic mechanisms, including both linear and branching polymerizations, are presented to demonstrate the applicability of the proposed method.     

Combined effect of chill storage and modified atmosphere packaging on mussels (Mytilus galloprovincialis) preservation

Changes in biochemical indices, microbial growth, headspace and sensory quality of mussels which had been packaged in two modified atmospheres [Modified atmosphere packaging (MAP) 1: 60% CO₂/20% N₂/20% O₂ and MAP 2: 60% CO₂/40% N₂] and under vacuum (VP) were studied for 14 days. The results showed better quality retention and greater shelf life of mussels packaged under MAP 1 as compared to MAP 2 and VP samples. Increase in total volatile basic nitrogen followed the order: MAP 1 < MAP 2, VP < air (control) samples while increase in trimethylamine nitrogen followed the order: MAP 1 < air < MAP 2 < VP. The 2‐thiobarbituric acid (TBA) values of MAP 1 and air samples were significantly higher (p < 0.05) than the TBA values of VP and MAP 2 samples. MAP 1 showed a greater (p < 0.05) inhibition effect on total viable count of mussel samples than all other packaging conditions. Based primarily on odour scores, the MAP 1 samples remained acceptable up to ca. 10–11 days, the MAP 2 and VP up to ca. 7–8 days while the air‐packaged samples up to ca. 5–6 days of storage. Copyright © 2007 John Wiley & Sons, Ltd.     

An inter-comparison of black-carbon-related instruments in a laboratory study of biomass burning aerosol

Black carbon (BC)-containing particles are the most strongly light absorbing aerosols in the atmosphere. Measurements of BC are challenging because of its semi-empirical definition based on physical properties and not chemical structure, the complex and continuously changing morphology of the corresponding particles, and the effects of other particulate components on its absorption. In this study, we compare six available commercial continuous instruments measuring BC using biomass burning aerosol. The comparison involves a Soot Particle Aerosol Mass Spectrometer (SP-AMS), a Single-Particle Soot Photometer (SP2), an aethalometer, a Multiangle Absorption Photometer (MAAP), and a blue and a green photoacoustic extinctiometer (PAX). An SP-AMS collection efficiency equal to 0.35 was measured for this aerosol system. The corrected SP-AMS BC mass measurements agreed within 6% with the SP2 refractory BC mass values. Two regimes of behavior were identified for the optical instruments corresponding to high and low organic/BC ratio. The mass absorption cross-sections (MAC) measured varied from 26% to two times the instrument default values depending on the instrument and the regime. The presence of high organic aerosol concentration in this system can lead to overestimation of the BC mass by the optical instruments by as much as a factor of 2.7. In general, the discrepancy among the BC measurements increased as the organic carbon content of the BC-containing particles increased.

© 2018 American Association for Aerosol Research